Finishing & Painting at LPE

Posted on: 2nd June, 2015

“Do you want it good or Tuesday?”..…”Is it too much to ask for both?” In many ways, the final stages of the prototyping process are the hardest.   This is when quality control is critical and the success or failure of a build can be on t Read More >>

Metal Sintering Now Available!

Posted on: 2nd April, 2015

LPE is pleased to announce the recent installation of the very latest metal sintering equipment. The ‘Concept Laser Mlab’ laser cusing system offers customers a fast and accurate solution for the direct production of high resolution metal components. Metal Sint Read More >>

LPE guest presents at IMechE, Additive Manufacturing & 3D Printing Seminar.

Posted on: 13th February, 2015

LPE would like to once again thank Engineers Ireland for the opportunity to present on the current Additive Manufacturing technologies arena at the latest IMechE seminar which took place on the 3rd of February 2015. The event proved a fantastic opportunity to share Read More >>

Visit LPE at Southern Manufacturing & Electronics 2015

Posted on: 13th January, 2015

Join LPE at the UK’s largest regional manufacturing technology, electronics and subcontracting event Southern Manufacturing & Electronics 2015, taking place at FIVE Farnborough from the 10th – 12th of February 2015. Since 1991 LPE has been commit Read More >>

Seasons Greetings from LPE.

Posted on: 10th December, 2014

We would like to thank all our Customers & Suppliers for their continued support in 2014. We look forward to working with you again in 2015.  Please note that our office will be closed* from: 25th December ’14 – 2nd January ’15 *Limited build Read More >>

Ulsters future engineers visit LPE

Posted on: 5th December, 2014

  Masters students from the University of Ulster’s School of Engineering visited LPE yesterday to gain greater insight into Rapid Prototyping & Additive Manufacturing technologies. The visit organised by Wesley McKnight, Senior Lecturer at the Unive Read More >>

Working with local college to improve Investment Casting services

Posted on: 18th November, 2014

LPE works with The Belfast Metropolitan College, to establish a production method specifically designed to improve casting quality and surface finish on master patterns for Investment Casting. Participating in the FUSE project LPE aims at improving their master pat Read More >>

Visit LPE at Stand B22 at the Aero Engineering Show

Posted on: 15th October, 2014

Committed to serving the Rapid Prototyping and Additive Manufacturing needs of the Aerospace Industry, LPE will be exhibiting at the Aero Engineering Show, taking place at the NEC from the 11th – 12th of November 2014. The UK’s sole trade show 100% dedi Read More >>

Join us at TCT Show + Personalize!

Posted on: 9th July, 2014

Join us on Stand H14 at this year’s TCT Show + Personalize to be held from the 30th September – 2nd October at the NEC Birmingham. TCT Show + Personalize is the worlds leading Rapid Prototyping & Additive Manufacturing Event, spanning every level of Read More >>

Rapid Prototyping in Northern Ireland – The Belfast Telegraph

Posted on: 12th May, 2014

World leading expert in Rapid Prototyping , Graham Tromans visited Northern Ireland earlier this month to advise on the potential 3D Printing technology holds for revolutionising manufacturing. Speaking at a the Centre for Competitiveness (CforC), Factories of the Read More >>

Contact us now for a fast, competitive quotation on your latest project!
Request a Quote