PA2200

PA2200 - Nylon based Selective Laser Sintering Material

 

Applications

 

Medical model of pelvis produced in PA Nylon

    • Tough, functional prototype models
    • Suitable for under bonnet applications
    • High temperature resistant (up to 150°C)
    • Suitable for snap fits/ living hinges
 Physical Properties
 Colour White
 Type Nylon
Flexible, good for snap fits/living hinges.
Mechanical Properties
 Test/ISO
Hardness Shore A/D  75D ±2 DIN 53505
Flexural Modulus 1,240 ± 130 (MPa)  DIN EN ISO178
Tensile Modulus  1,700 ± 260 (MPa)  DIN EN ISO527
Tensile Strength 45 ± 3 (MPa)
Impact Strength  32.8 ± 3.4 J/m DIN EN ISO180
Elongation Break (%)  20 ± 5%  DIN EN ISO527
   Thermal & Scientific Properties
Melting Point 172-180 °C  DIN 53736

 

 

Applications

 
Medical model of pelvis produced in PA Nylon

    • Tough, functional prototype models
    • Suitable for under bonnet applications
    • High temperature resistant (up to 150°C)
    • Suitable for snap fits/ living hinges
Physical Properties
Colour White
Type Nylon
Flexible, good for snap fits/living hinges.
Mechanical Properties
Hardness Shore A/D 75D ±2 Test/ISO: DIN 53505
Flexural Modulus 1,240 ± 130 (MPa) Test/ISO: DIN EN ISO178
Tensile Modulus 1,700 ± 260 (MPa) Test/ISO: DIN EN ISO527
Tensile Strength 45 ± 3 (MPa) Test/ISO: DIN EN ISO527
Impact Strength 32.8 ± 3.4 J/m Test/ISO: DIN EN ISO180
Elongation Break (%) 20 ± 5% Test/ISO: DIN EN ISO527
Thermal & Scientific Properties
Melting Point 172-180 °C Test/ISO: DIN 53736

Testimonial

“The service provided was of a very high level. All correspondents were punctual and professional, and the prototypes were provided in a timely and impressive manner. Overall I am very pleased with the prototypes, and would consider Laser Prototypes for work in the future”


Customer Testimonial - HP