Ceramax

Ceramax Applications. Heat and wear resistant components Stiff/rigid assemblies and prototypes Composite ceramic-like components Aesthetic components Moisture stable components Where metal plating of prototype parts is required
Physical Properties
Colour	Opaque White
Type	High Temperature Resin offering excellent abrasion, moisture & thermal resistance
*Mechanical Properties*
		Test/ISO
Hardness Shore A/D	89D
Flexural Strength	137 – 145 (MPa)	ATSM D790
Flexural Modulus	8,270 – 8,370 (MPa)	ATSM D790
Tensile Modulus	9,460 – 9,680 (MPa)	ATSM D638
Tensile Strength	78 – 87 (MPa)	ATSM D638
Impact Strength	14.5 – 17.9 J/m	ATSM D256
Elongation Break (%)	0.7 – 1.0%	ATSM D638
*Thermal & Scientific Properties*
Glass Transition Temperature	108 – 110°C	DMA, E”
Heat Deflection Temp (°C)		ATSM D648
@66 PSI	148 °C
@264 PSI	95°C
@66 PSI w/ thermal postcure	220°C
Co-efficient of Thermal Expansion		E831-93
TMA (T<Tg, 25 – 57°C)	31.1µ/m – °C
TMA (T<Tg, 70 – 200°C)	87.4µ/m – °C

Ceramax Applications. Heat and wear resistant components Stiff/rigid assemblies and prototypes Composite ceramic-like components Aesthetic components Moisture stable components Where metal plating of prototype parts is required
Physical Properties
Colour	Opaque White
Type	High Temperature Resin offering excellent abrasion, moisture & thermal resistance
*Mechanical Properties*
Hardness Shore A/D	89D
Flexural Strength	137 – 145 (MPa)	Test/ISO: ATSM D790
Flexural Modulus	8,270 – 8,370 (MPa)	Test/ISO: ATSM D790
Tensile Modulus	9,460 – 9,680 (MPa)	Test/ISO: ATSM D638
Tensile Strength	78 – 87 (MPa)	Test/ISO: ATSM D638
Impact Strength	14.5 – 17.9 J/m	Test/ISO: ATSM D256
Elongation Break (%)	0.7 – 1.0%	Test/ISO: ATSM D638
*Thermal & Scientific Properties*
Glass Transition Temperature	108 – 110°C	Test/ISO: DMA, E”
Heat Deflection Temp (°C) @66 PSI	148 °C	Test/ISO: ATSM D648
Heat Deflection Temp (°C) @264 PSI	95°C	Test/ISO: ATSM D648
Heat Deflection Temp (°C) @66 PSI w/ thermal postcure	220°C	Test/ISO: ATSM D648
Co-efficient of Thermal Expansion TMA (T<Tg, 25 – 57°C)	31.1µ/m – °C	Test/ISO: E831-93
Co-efficient of Thermal Expansion TMA (T<Tg, 70 – 200°C)	87.4µ/m – °C	Test/ISO: E831-93

For further information contact our sales team on 028 9070 6940.

Testimonial

“We had been using CNC to produce highly accurate models. But Rapid Prototyping produced parts 4 times faster at half the cost”